MADE IN CHINA
This Awoco fly trap lamp is specifically designed to keep the
living space or sanitary area free of pests, such as mosquitoes,
flies, moths and other small insects. The lamp ultilizes the UV
black light, which the pests find irresistable, and captures the
pests to a container with a powerful downward airstream. The
captured pests will stay inside the container and die. Empth
the container regularly or when it’s full for the most effective
result.
FLY TRAP LAMP USER MANUAL
MODEL: FT-GK4 Portable
Test the Device Before Installing
1. Remove the device from the package carefully. Check the body and parts for shipping
damage.
2. Check the posistion of the bulb and the board to see if they are seated correctly.
3. Connect the lamp to the nearest 110V AC outlet.
4. If the lamp lights up immediately, proceed to installing the lamp.
5. If the lamp doesn’t light up, refer to the troubleshooting section to determind the issue.
Cautions and Warnings
1. For indoor use only. DO NOT install the lamp outdoors where it’s exposed to weather
elements.
2. Always disconnect the power before servicing the lamp.
3. DO NOT touch the base the bulb when the lamp is connected to a power outlet.
4. DO NOT stare at the UV light directly for a long period of time as doing so will cause
damage to your eyes.
5. DO NOT install the lamp in an area that contains flammable gas or explosive powder..
Lamp Placement
1. This lamp is portable and does not need to be installed.
2. Choose a location with high insects desity, close to an electrical outlet (hard wired
availability) and easy serviceability.
3. DO NOT place the lamp near any competing light sources, such as bright sunlit
windows, indoor lighting fixtures.
4. This lamp can be placed on the floor, on the table or a nightstand.
Maintenance
Emptying the Container:
1. Unplug the power cord and wait for 5 minutes.
2. The pests container is located at the bottom of the lamp.
3. Open the container and empty the dead pests to a trash bag.
4. Use a paper towel to wipe off any remaining pests.
5. Put the container back to the lamp.
6. Connect the power.
Troubleshooting
Issue: The lamp doesn’t light up when I connect it to a power outlet.
Solution: Check if the lamp is damaged during shipping.
Issue: The lamp flickers when it lights up.
Solution: It’s normal for a new fluorescent lamps to flicker when used for the first time.
Unplug the power cord and plug it back after a few seconds. Leave the lamp on
for 48 hours and the flicker will not occur again.
If the issue persists after 48 hours, please contact Awoco technical support team.
Product Warranty
This product is warranted for a limited period of ONE YEAR Parts, begins from the date of
purchase.
This limited warranty is applied to the original retail purchaser and valid only for products
purchased for home use in the continental United States of America.
This limited warranty is non-transferable and does not extend to the subsequent owners of
this product.
Any applicable implied warranties, including the warranty of merchantability, are limited in
duration to a period of express warranty as provided herein beginning with the date of
original purchase at retail and, no warranties, whether express or implied, shall apply to
this product thereafter.
Product Support
If you need help with other issues not listed above, please contact us at 1-888-412-3428,
between 10 AM and 5 PM, Monday - Friday, Pacific Time.
Or
Email us at [email protected].
