Loading ...
Loading ...
Loading ...
Manual Installation
(Home) > Settings > Install
Channels > Satellite installation > Manual
installation
Manually install satellite.
• LNB - Select the LNB for which you want to add
new channels.
• Polarisation - Select the polarisation you need.
• Symbol rate mode - Select Manual to enter symbol
rate.
• Frequency - Enter the frequency for the
transponer.
• Search - Search for transponder.
Satellite CAMs
If you use a CAM – a Conditional Access Module with
a smart card – to watch satellite channels, we
recommend to do the satellite installation with the
CAM inserted in the TV.
Most CAMs are used to descramble channels.
CAMs (CI+ 1.3 with Operator Profile) can install all the
satellite channels by themselves on your TV. The
CAM will invite you to install its satellite(s) and
channels. These CAMs not only install and
descramble the channels but also handle regular
channel updates.
Channel List Copy
Introduction
Channel list copy and Satellite list copy are intended
for dealers and expert users.
With Channel list copy/Satellite list copy you can
copy the channels installed on one TV onto another
Philips TV of the same range. You can avoid the time-
consuming channel search by uploading a predefined
channel list on a TV.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV.
• Both TVs have compatible software versions.
• Use a USB flash drive of minimum 1 GB.
Copy a Channel List, Check Channel List Version
Copy a channel list to USB flash drive
To copy a channel list…
1 - Switch on the TV. This TV should have channels
installed.
2 - Plug in a USB flash drive to USB 2* port.
3 - Select (Home) > Settings
> Channels > Channel list copy or Satellite list Copy
and press OK.
4 - Select Copy to USB and press OK.
5 - When copying is done, unplug the USB flash
drive.
Now you can upload the copied channel list onto
another Philips TV.
* Note: only the USB port that marked with USB 2
supports copying channel list operation.
Check channel list version
(Home) > Settings > Channels > Channel list
copy or Satellite list Copy > Current version
Upload a Channel List
To not Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, select
(Home) > Settings > Channels > Channel List
Copy or Satellite list Copy > Copy to TV and
press OK. Enter your PIN code if necessary.
4 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, see chapter Re-install channels. Start this
procedure until you reach the country setting.
Press Back to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Re-install channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
22
Loading ...
Loading ...
Loading ...