Loading ...
Loading ...
Loading ...
12
Specifications
MODEL NUMBER: PV1000HF PV1800HF PV3000HF
Continuous Power (@ 20° C):* 1000 Watts 1800 Watts 3000 Watts
Double Boost™ Peak Surge Power:* 2000 Watts 3600 Watts 6000 Watts
DC Input Volts (Nominal): 12 VDC 12 VDC 12 VDC
DC Input Voltage Range: 10 - 15 VDC 10 - 15 VDC 10.5 - 15 VDC
DC Input Connection: User Supplied Cables User Supplied Cables User Supplied Cables
Output Volts (Nominal): 120 VAC 120 VAC 120 VAC
Output Frequency (Nominal): 60 Hz, ± 0.5% 60 Hz, ± 0.5% 60 Hz, ± 0.5%
Efficiency: Up to 94% Up to 94% Up to 94%
Output Waveform: Modified Sine Wave Modified Sine Wave Modified Sine Wave
* DoubleBoost duration (instantaneous). Actual output depends on battery age, battery charge level and ambient temperature.
Minimum Recommended Cable Sizing Chart
†
Always loosely twist each pair of cables (one positive and one negative) together. Use in conjunction with DC wiring
connection instructions in the Battery Connection section. Using 4 conductors is recommended (but not required) to
obtain maximum output power from PV3000HF models.
Wire Gauge
2 Conductors (all models) 4 Conductors (PV3000HF only)
Watts 6 4 2 0 00 Twin 00
500 15 ft 25 ft 39 ft 62 ft 79 ft 158 ft
700 11 ft 18 ft 28 ft 44 ft 56 ft 112 ft
1000 N/R 12 ft 20 ft 31 ft 39 ft 78 ft
2000 N/R N/R N/R 16 ft 20 ft 40 ft
2400 N/R N/R N/R 13 ft 16 ft 32 ft
3000 N/R N/R N/R 10 ft 13 ft 26 ft
† N/R = Not Recommended. NOTE: Acceptable power is directly related to cable length (i.e. - the shorter the cable, the better the
performance)
Tripp Lite Inverters include a Battery Charge Conserver (Load Sense) Control which saves battery power by
allowing users to set the minimum load level at which the unit’s inverter turns on. Users can significantly
reduce the No Load DC Input Current to a very low amperage power level with the use of this control.
Loading ...
Loading ...
Loading ...