Loading ...
Loading ...
Loading ...
Filling The Water Tank
CAUTION: Always unplug the unit before removing the Water Tank. Do not touch the water in the base.
4
Remove Dual Directional Mist
Nozzle prior to lling the water
tank.
Attach Ceramic/Demin-
eralization lter (included)
to the Tank Cap by
aligning the lock tabs on
both and turning the cap
counterclockwise to lock.
When attached properly
the Filter will not fall from
the Tank Cap.
Replace the Tank Cap by
rmly turning clockwise until
tight. Turn the Water Tank
upright and check the Tank
Cap for leaks. If any water
drips, remove the Tank
Cap and retighten. Do not
place Water Tank on the
Humidier Base if the cap
is leaking.
Lift the handle up and replace
on the Humidier Base, make
sure to follow the shape of the
Water Tank and the Humidier
Base (as shown to the left) so
that the tank sits level and ush
to the base. Ensure the tank is
rmly seated.
Attach the Dual Directional
Mist Nozzle to the top of the
Humidier Tank for desired use
as pictured.
Lift the handle on top of the
Water to remove the Humidier
from the base.
Make sure the handle is
snapped back into place, then
turn the Water Tank upside
down and remove the Tank Cap
by turning it counter clockwise.
Fill the Water Tank with clean,
cool tap water. Do not use
extremely cold water, since it
may temporarily reduce the
mist output. Never ll with
hot/warm water or add ad-
ditives as this could damage
the unit and void the warranty.
1
2
5
6
4
8
3
7
Loading ...
Loading ...
Loading ...