Loading ...
Loading ...
Loading ...
Page 13
INSTALLATION
INSTRUCTIONS
INSTALLATION INSTRUCTIONS
WARNING - Before You Begin
Read these instructions completely and
carefully.
• IMPORTANT - Save these instructions.
• IMPORTANT - Observe all governing
codes and ordinances.
We recommend that two people install
this product.
Proper installation is the responsibility of
the installer.
Product failure due to improper
installation is not covered under the
Limited Warranty.
You MUST use all supplied parts and
use proper installation procedures as
described in these instructions when
installing this air conditioner.
Do not, under any circumstances, cut or
remove the third (ground) prong from
the power cord.
Do not change the plug on the power
cord of the air conditioner.
Aluminum house wiring may present
special problems - consult a qualified
electrician.
When handling the air conditioner, be
careful to avoid cuts from sharp metal
edges and aluminum fins on front and
rear coils. Please wear cut-resistant
gloves.
NOTICE
Save the carton and these installation
instructions for future reference.
The carton is the best way to store the unit
when not in use.
Window Requirements
Your air conditioner is designed to install
in standard double hung windows with
opening widths of 23” to 36” (584mm to
914mm).
OFFSET
INNER
WINDOW
SILL
INTERIOR
WALL
Wooden Windows
EXTERIOR
WALL
23" to 36"
584mm to 914mm
H
Table 1
Model
H
8000 BTU/h 10000~14500 BTU/h
14” (356mm) 15-1/2” (394mm)
Tools You Will Need
Phillips
Screwdriver
Level
Tools You May Use
Flathead Screwdriver
Pencil
Ruler or tape
measure
Scissors or knife
Loading ...
Loading ...
Loading ...