LG Electronics LDFC2423B Owner’s Manual English

Loading ...

21INSTALLATION

ENGLISH

4 Power on the dishwasher and run a Turbo

cycle to verify proper operation.

5 Check for leaks at the drain hose and water

supply connection.

6 If a water leak is detected, press and hold the

Start button for 3 seconds to cancel the wash

cycle and automatically drain the water from

the dishwasher. Tighten all water connections

and run another cycle. Repeat until no leaks

are detected.

7 Replace the lower cover.

CAUTION

• Only install the lower cover provided with the

dishwasher. Do not install cabinet baseboard a

as it may cause noise and leakage.

8 Remove the protective film from the door, if

present. Leaving the film on may cause

discoloration or condensation on the door.

Installation Check Error Codes

Refer to the chart below before calling for service.

Error Code Possible Cause and Solution

Drain hose is kinked or pinched.

• Feed the drain and water

supply hoses through the hole

under the sink. Then gradually

slide the dishwasher into the

cabinet while pulling on the

hoses under the sink to take up

any slack. This helps avoid

kinking the hoses or trapping

them beneath the dishwasher.

Drain hose is connected to the

disposal without removing the

knockout plug.

• Remove the knockout plug

from the disposal.

Waste tee or disposal is clogged.

• Remove knockout plug on the

waste tee or disposal.

Water supply line is kinked

under dishwasher.