Loading ...
Loading ...
Loading ...
To activate SLEEP mode, press the MODE button
again.
This function slows the BREEZE setting by
one level every half hour until it reaches LOW.
7. To adjust airflow direction, position the air vent
tabs (Figure 1, F) on the fan housing up or down to
desired angle.
8. To turn the fan OFF press the POWER button (A).
NOTE: Lights on the control panel will indicate the
corresponding functions you have selected.
REMOTE CONTROL
NOTE: THIS UNIT INCLUDES ONE LITHIUM BATTERY,
CR2025/3V. PLEASE REMOVE THE PROTECTIVE STICKER
FROM THE REMOTE CONTROL BATTERY BEFORE OPERATION.
To operate the fan with the remote control, aim it toward
the control panel on top of the fan tower.
The remote control can operate from a distance up to
approximately 5 meters/feet from the fan body and at
an angle variation of 15-20 degrees.
Avoid exposing the display panel to direct sunlight, as it
may interfere with signal transmission.
Replacing the Remote Control Battery
The cells should be disposed of properly, including
keeping them away from children. Even used cells may
cause injury.
a) Locate the battery compartment on the back of the
remote control handset. Press tab and pull out
battery.
b) Remove old battery.
c) Place new battery into
battery compartment.
d) Slide battery
compartment into the
remote control
handset.
NOTES:
• Remove the battery
from the remote when
it is not in use for an extended period.
• Remove the battery before discarding the remote
at the end of its useful product life.
• Do not discard used batteries into household trash
containers. Contact your local government for
disposal or recycling practices in your area.
SETTING UP THE HOLMES MOBILE APP
Note: A 2.4 GHz Wi-Fi network is required.
1. Download the Holmes App from Google Play, the
Apple App Store or the QR code located on the back
of this Instruction Manual.
2. Create an account by following
the steps in the App.
3. Enter the verification code you
received to confirm your account
and create a password.
4. Select "Add Device" or the plus
(+) sign in the top right corner.
Auto Pairing (Recommended
Method)
1. Ensure Bluetooth
®
, Wi-Fi, and
GPS are activated on your
mobile device.
2. Press and hold the OSC/WIFI button on the
fan's control panel for 5 seconds, until an audible
beep is heard and the red indicator light is flashing
which indicates the device is in pairing mode. Note:
if pairing is not completed within 2-3 minutes, the
device will exit pairing mode and step 2 will need to
be repeated.
3. Select “Auto Scan” at the top of the screen.
You should see an icon for the fan that has been
found.
4. Click "Next."
5. Input your Wi-Fi name and password.
6. Wait for the connection to be established.
7. Press "Done" (top right-hand corner).
Your fan is now available to control from your
smartphone.
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction
manual. This fan is not for continuous operation or
equivalent.
3. To protect against electrical shock do not immerse unit,
plug or cord in water or spray with liquids and plug
the appliance directly into a 120V AC electrical outlet.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use, when moving fan
from one location to another, before putting on or
taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid fire hazard, NEVER place the cord under rugs
or any parts near an open flame, cooking or other
heating appliance.
9. Do not operate any appliance with a damaged cord or
plug after the appliance malfunctions, or has been
dropped/damaged in any manner. Discard fan or
contact customer service.
10. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
11. The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
12. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
13. Do not use outdoors.
14. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
15. Always use on a dry, level surface.
16. Do not operate fan until fully assembled with all parts
properly in place.
17. This product is intended for household use ONLY and
not for commercial or industrial applications.
18. WARNING: To reduce the risk of electrical shock and
injury to persons, do not use in window.
19. WARNING: To reduce the risk of fire or electric shock,
do not use this fan with any solid-state speed control
device.
20. This product employs overload protection (fuse).
A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse
blows, a short circuit may be present and the product
should be discarded or contact customer service.
21. Use the fan in a well-ventilated area. When in use,
place the fan at least 8" from any walls to ensure
proper air flow. The fan must not be located
immediately below or beside a curtain.
22. Do not obstruct the airflow with any objects or place
anything inside the fan opening.
23. Do not use in areas where curtains could be sucked in.
24. Do not use in extreme temperatures, humidity, or dusty
environments.
25. Do not place heavy objects on the fan.
26. Do not place the fan directly below a power outlet or
you risk the cord being sucked in.
27. When the fan is oscillating do not manually turn the
fan to avoid damage.
28. Children under 8 should not operate the fan.
29. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
!
WARNING: Chemical Burn Hazard. Keep batteries
away from children. This product contains a lithium
button/coin cell battery. If a new or used lithium button/
coin cell battery is swallowed or enters the body, it can
cause severe internal burns and can lead to death in as
little as 2 hours. Always completely secure the battery
compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and
keep it away from children. If you think batteries might
have been swallowed or placed inside any part of the body,
seek immediate medical attention.
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in
a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
REMOTE CONTROL AND MOBILE APP
INSTRUCTIONS
ASSEMBLY
Estimated assembly time: 5-10 minutes
No tools required.
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM
THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS
FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR
FAN.
1. Align and press together the base halves (figure 2).
2. Remove the lock nut from the fan housing by
rotating counterclockwise (Figure 2, 3).
3. Place the base onto the bottom of the fan housing
and rotate to secure.
4. Place the lock nut onto the bottom of the base and
rotate clockwise to tighten (Figure 3).
5. Place fan upright on a dry, level surface.
OPERATING INSTRUCTIONS
1. Plug the cord into a standard 120 Volt AC outlet.
2. To turn the fan ON, press the POWER button (A)
located on the control panel or remote control.
The fan will start running in the lowest setting "I"
(LOW).
3. Press the SPEED button (C) to cycle through the 3
speed settings in sequence.
The corresponding indicator light will illuminate to
confirm the selection:
I-Low
II-Medium
III-High
4. To turn OSCILLATION ON and OFF, press the
Oscillation (B) button.
5. To set automatic shutoff, press the TIMER button (E).
When set, the fan will run and automatically shut
off after the set duration of time (1-15 hours) has
expired.
Note: To set the timer for 15 hours, press the timer
button until all four lights (1H, 2H, 4H, 8H) are
illuminated.
6. To activate BREEZE mode, press the MODE
button (D).
The fan will cycle through alternating speeds with
brief pauses to simulate a natural outdoor breeze:
LOW BREEZE: Cycles through low and medium
speeds.
MEDIUM BREEZE: Cycles through medium and low
speeds.
HIGH BREEZE: Cycles through medium, high and
low speeds.
A. Power Button
B. Oscillation / WIFI Button
C. Speed Button
D. Mode Button
E. Timer Button
F. Speed Setting Indicator Lights
G. Timer Indicator Lights
H. Mode Indicator Lights
POWER
TIMER
MODE
OSC SPEED
A
B
D
C
E
1H 2H 4H 8H
BREEZE
SLEEP
III
II
I
SPEED MODE POWER TIMER OSC
WIFI
B
C
D A E
G
F H
POWER
TIMER
MODE
OSC SPEED
A
F
D
E
B
C
A. Control Panel
B Fan Housing
C. Base Halves
D. Remote Control
Storage
E. Remote Control
F. Air Vent Tabs
Figure 1
C
Lock Nut
C
Lock Nut
Figure 2
Figure 3
Power
Cord
Figure 5
ASSEMBLY AND OPERATING
INSTRUCTIONS
PARTS AND ASSEMBLY
Figure 4
Loading ...
Loading ...
Loading ...