Loading ...
Loading ...
Loading ...
8.1 START THE MACHINE
NOTE
The machine can not work when the lock-off button is
on the center.
1. Push the lock-off button to the left or right side to
unlock the trigger.
2. Pull the trigger to turn the machine ON.
Variable speed
The machine has a variable speed switch that delivers
higher speed with increased trigger pressure and lower
speed with decreased trigger pressure.
8.2 STOP THE MACHINE
1. Release the trigger to turn the machine OFF.
WARNING
Release the trigger and allow the machine to come to
a complete stop.
8.3 ORBITAL MOTION
Orbital motion provides faster, more effcient cutting.
Choose from four orbital adjustment position for fine to
aggressive cutting.
0
1
2
3
0
Hard materials such as metals or thin
sheet metals. This setting can be used
with knife blades, grit edge blades,
rasp work, and down cutting blades.
0
1
2
3
1
Soft materials where cleaner cutting or
delicate scrolling work is performed.
0
1
2
3
2
Medium density materials such as
harder woods or particle board.
0
1
2
3
3
Soft materials such as wood, plastics,
etc. and when fast cutting is more im-
portant than a clean cut.
8.4 OPERATE THE MACHINE
NOTE
For best performance, always select a specified blade
for the particular application and type of material you
wish to cut.
General cutting
1. Put the front of the saw base on the workpiece
2. Align cutting edge of the blade with the line on your
workpiece
3. Start the saw and move it forward on the work
surface.
Plunge cutting
1. Make the line of cut clearly on the workpiece.
2. Set the cutting blade at 0.
3. Put the front of the saw base on the workpiece
4. Use high speed to start the machine and slowly
lower the blade into the workpiece until the blade
cuts through the wood.
WARNING
To decrease the risk of injury, keep hands away from
the blade and all moving parts. Always wear safety
gloves or glasses with side shields.
9
English
EN
Loading ...
Loading ...
Loading ...