Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/89077888-42480/bgc.png)
12
FINAL INSTALLATION
4. Install the blade arm (J) to the underside of the motor
(D) with motor screws (N) previously removed (Step 5,
page 8). Tighten with Phillips screwdriver.
Repeat for each blade arm (J).
5. Remove the three preassembled switch housing screws
(M) from the light pan (G). Lift the light pan (G) onto
the light kit (F) and secure the light pan (G) with the
previously removed switch housing screws (M).
Note: Align the notch in the light kit with the bump on
the lower edge of the light kit.
6. Install the bulb (H) into the socket of the light kit (F).
4
J
N
D
5
G
M
F
Bump
Notch
H
F
6
Loading ...
Loading ...
Loading ...