Loading ...
Loading ...
4
REVERSING THE DOOR SWING
Tools required:
• Phillips style screwdriver
• Flat screwdriver
• Hexagonal spanner
• Hexagonal socket wrench.
5
1. Open the door and remove the hinge cover
at top right.
6. Set the door securely onto the bottom
hinge in its new position. Support the door
whilst you re-fit the top hinge (see step 7).
7. Fit the flipped door top hinge into the hole
on the top of the door. Screw the top hinge
to the left of the cabinet top panel.
5. Tilt the appliance no more than 45° from vertical and use a hexagonal socket wrench to
remove the screws that fix the bottom hinge to the unit. Move the bottom hinge to the left
side of the unit and screw it into position.
3. Take the top hinge (A) and flip it over. The door hinge mount (B) will then be pointing up.
Disassemble the hinge mount with its nut and washer. Turn the hinge mount over so it is
then pointing down and re-assemble into the top hinge. The finished item will look like (C).
4. Remove the door limit block from the right side of the door end. Remove the blanking
plate on the left side of the door end and screw the door limit block into that void. The
finished item will look like (D).
8. For a neat finish, fit the hinge cover over
the void on the right side of the top panel.
9. Move the levelling foot to the opposite side
of the cabinet. Using a spirit level, adjust the
foot until the unit is level and stable.
2. Support the door safely and use a Phillips
driver to remove the two screws that fix the
top hinge to the cabinet. Set the door aside.
1
5
3
6 7
94 8
2
A
D
B
C
Loading ...
Loading ...
Loading ...