Loading ...
Loading ...
Loading ...
EN 34
OTHER
Problem Cause/Solution
Symbol D flashes: • The door has been opened for too long or too frequently.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• Too much fresh food has been put in at the same time.
Door does not
open easily.
You are trying to open the appliance’s door just after you have closed
the door. Then opening the door is difficult. When you open the door,
cold air escapes from the appliance and is replaced by warm air
from the surroundings. As this air cools a slight vacuum is created
that makes it more difficult to open the door. The situation returns to
normal after a few minutes, and the door opens easily again.
Some or all of the
LED lighting does
not work.
Consult a service technician about LED lighting that is not working.
You may not try to repair LED lighting.
Appliance makes a
noise.
• The appliance is cooled by a refrigeration system with a
compressor (and with some models, also a fan) that makes
a noise. The noise level depends on the installation of the
appliance, its correct use and its age.
• When you connect the appliance to the power supply the noise
made by the compressor or flowing refrigerant may be slightly
louder. This is not indicative of a defect, and has no effect on the
service life of the appliance. The appliance will make less noise
after a while.
• The appliance may be temporarily noisier after the door has been
opened for too long or too frequently, a large quantity of fresh
food has been put in the appliance or the intensive freezing or
intensive cooling function has been activated.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
Loading ...
Loading ...