Loading ...
Loading ...
EN
W415-4039 / 03.24.22
3
table of contents
1.0 getting to know your appliance 5
1.1 control access 6
1.2 rating plate information 6
2.0 operating your appliance 7
2.1 initializing the transmitter / battery holder for the first time 7
2.2 using your appliance 7
3.0 remote control layout 8
3.1 general transmitter layout 8
3.2 temperature display 8
3.3 flame height 9
3.4 blower speed 9
3.5 night light dimmer control 9
3.6 in the event of a power failure 9
3.7 continuous pilot / intermittent pilot (CPI/IPI) selection 9
3.8 eFIRE Controller application 10
3.9 low battery 10
3.10 battery holder / backup installation 10
4.0 operation 11
4.1 pilot-on-demand 12
5.0 clearances around fireplace 13
5.1 optional heat management system 14
5.2 clearances around appliance (TV and valuable objects) 15
6.0 maintenance 17
6.1 care of glass 17
6.2 care of plated parts 18
6.3 safety barrier removal 18
6.4 door trim removal 19
6.5 firebox glass door removal 19
7.0 replacement parts 20
8.0 accessories 21
9.0 troubleshooting 22
10.0 warranty 23
This owner’s manual is written for a complete series of fireplaces that have a variety of different features and speci-
fications. Before reading this manual, be sure you know which model of fireplace that you have. This information
will have been filled out by the installer on the following page and on the rating plate that is permanently attached
to the fireplace (see “rating plate information” section).
This manual is for the:
• Ascent Linear Premium Series (BLP42, BLP46 and BLP56 models)
If required, more detailed technical information is included in the appliance installation manual.
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial are denoted by a vertical line in the margin.
Visit the Napoleon website for the most current version of your appliance’s manual.
Changes, other than editorial, are denoted by a vertical line in the margin.
This appliance is suitable for use with the optional Universal Heat Management system. THIS MANUAL DOES
NOT include detailed information relating the optional sytem. Framing and finishing are NOT the same. For
further details, refer to UHM instructions provided with the kit before starting installation.
Loading ...
Loading ...
Loading ...