Loading ...
Loading ...
Loading ...
7
l) Remove a magnet sensor from right top hinge cover (the one is removed at the
beginning), the parts has two wires and a two pins socket. Install it under the new
hinge cover from the accessory bag. Connect the two pins socket to the wire harness
from the cabinet.
m) When install the top left hinge cover, put the front on the position first, make sure a
clip is attached to the metal hinge properly. Then push the back part on the
position and secure it with two screws.
Double check and make sure the magnet is installed on the door top left side
near the hinge cover.
n) Remove the handle cover,
remove four screws and the handle.
Install the handle on the other side of the door
o) After the door handle is installed, the door reversing operation is finished.
If the unit keeps beeping after door is reversed, please check the following tips.
1. Check step c, make sure magnet is put into another side(new hinge side).
2. Check step L, make sure the magnet sensor is put under the new hinge cover properly.
3. Check setp m, make sure the hinge cover is on the position properly, a clip under the
front edge need to be attached to metal hinge.
INSTALLATION INSTRUCTIONS
Before Using the Refrigerator
• Remove the exterior and interior packing.
Install front
part first
Magnet
Loading ...
Loading ...
Loading ...