Loading ...
Loading ...
Loading ...
22
6. Attach the quick connect onto the faucet adapter, by pulling down the outer locking collar on
the quick connect, while pushing the quick connect upward onto the faucet adapter.
7. When the quick connect snaps onto the faucet adapter, release the locking collar. Verify the
connection is secure.
8. Slowly open the hot water line and check for any sign of water leaks at all hose connections. If
leaks are located, immediately close the water supply and repair the hose connections.
IMPORTANT:
1. Once you open the water supply line, (even if it is closed immediately thereafter), the inlet
hose will be pressurized.
2. To relieve water pressure from inside the inlet hose, (make sure the water line (faucet) is
closed): press and hold the red pressure relief button on the quick connect until the flow of water
stops.
WARNING! FAILURE TO RELIEVE WATER PRESSURE, BEFORE DISCONNECTING THE QUICK-
CONNECT FROM THE FAUCET, WILL RESULT IN BACK-PRESSURE OVER-SPRAY. THE TEMPERATURE
OF INCOMINGWATER CAN BE VERY HOT, AND BACK-PRESSURE OVER-SPRAY COULD CAUSE
SEVERE BURNS AND/OR SCALDING.
DANGER: DO NOT LET CHILDREN DISCONNECT THE DISHWASHER; CLOSE SUPERVISION OF
CHILDREN IS ALWAYS IMPORTANT AROUND APPLIANCES.
NOTE: Hard water conditions will adversely affect the washing performance of your dishwasher.
Hard water conditions will also contribute to 'lime' (white film substance) deposits and/or 'scaling'
on the stainless steel surface of the dishwasher tub and heater element, located in the sump
underneath the removable filter screen. To assist in minimizing these conditions, it is
recommended to periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of
white vinegar at least once a week.
Disconnecting your dishwasher:
1. Shut off the water supply at the faucet.
2. Disconnect the power supply cord
Loading ...
Loading ...
Loading ...