Loading ...
Loading ...
Loading ...
Communication with PC
Copyright © Itech Electronic Co., Ltd. 47
Raw-socket service.
LAN Server
The configurable services include: mDNS, Ping, Telnet, Web, VXI and Raw
Socket.
The operation steps to configure are as follows.
This configures the instrument address (IP Mode).
1. Press [Shift]+[I-set] (Menu) to enter into the menu setting interface.
2. Use left/right key or rotate the knob to select Config >
Communication and press [Enter] to confirm.
3. Use left/right key or rotate the knob to select LAN and press [Enter]
to confirm.
4. Use left/right key or rotate the knob to select Config and press [Enter]
to confirm.
The first displayed menu item IP Mode is to configure the instrument
address.
5. Press [Enter] to confirm.
–
Auto: automatically configure the addressing of the instrument;
–
Manual: manually configure the addressing of the instrument.
6. After the setting is completed, press [Esc] to exit.
7. Restart the instrument and the modified configuration item will take
effect.
This selects the LAN services to enable or disable (Server Config).
1. Press [Shift]+[I-set] (Menu) to enter into the menu setting interface.
2. Use left/right key or rotate the knob to select Config >
Communication and press [Enter] to confirm.
3. Use left/right key or rotate the knob to select LAN and press [Enter]
to confirm.
4. Use left/right key or rotate the knob to select Config and press [Enter]
to confirm.
5. Use left/right key or rotate the knob to select Server Config and
press [Enter] to confirm.
6. Use left/right key or rotate the knob to select the desired service and
press [Enter] to confirm.
7. Rotate the knob to adjust the value and press [Enter] to confirm.
–
On: indicates enable the service
–
Off: indicates disable the service
8. After the setting is completed, press [Esc] to exit.
9. Restart the instrument and the modified configuration item will take
effect.
Reset the LAN to the Default Settings
The operation steps to reset the LAN to the default settings are as follows.
1. Press [Shift]+[I-set] (Menu) to enter into the menu setting interface.
2. Use left/right key or rotate the knob to select Config > Communication
and press [Enter] to confirm.
3. Use left/right key or rotate the knob to select LAN and press [Enter] to
Loading ...
Loading ...
Loading ...