Vacmaster VOC508S 1101 Operator’s Manual

Loading ...

INSTALLING & CLEANING CARTRIDGE

FILTER

INSTALLING CARTRIDGE FILTER

1. Verify that the power cord is disconnected from the outlet (Fig. 1).

2. Remove the power head and place in upside down position.

3. Install the cartridge lter over the lter cage making sure the cage is completely covered (Fig. 2

& 3).

4. Place the lter retainer on the top of the cartridge lter over the raised lip and tighten down by

turning the retainer clockwise; do not over-tighten (Fig. 4 & 5).

5. Place the power head back onto the collection tank.

REMOVING & CLEANING CARTRIDGE FILTER

1. Unlock and remove the lter retainer by turning the retainer handle counter clockwise (Fig. 6).

2. With the removed power head in an upside down position, carefully remove the cartridge lter

from the lter cage (Fig. 7).

3. Clean the cartridge lter by gently tapping or brushing dirt off. Cleaning should not be done

indoors in living areas. For optimal performance a new lter is recommended.

4. Install cleaned or new lters as above in steps 2-4 of Installing Cartridge Filter.

5. Allow the wet lter to air dry for 24 hours before installing onto the lter cage.

21 4

Loading ...

Vacmaster VOC508S 1101 Red Edition Stainless Steel Wet Dry Shop Vacuum 5 Gallon 4 Peak HP 1-1/4 inch Hose Powerful Suction