Loading ...
Loading ...
Loading ...
Problem Possible cause & Solution
The motor
runs
continuously
·
Large quantity of warm food has
recently been stored within the appliance.
·
The temperature outside the appliance
is too high.
·
Doors are kept open too long or too often
·
After your installing the appliance or it has
been switched off for a long time.
A layer of frost
occurs in the
appliance
Check that the air outlets are not blocked by
food and ensure food is placed within the
appliance to allow sufficient ventilation. Ensure
that door is fully closed. To remove the frost,
please refer to cleaning and care chapter.
Temperature
inside is too
warm
You may have left the doors open too long or
too frequently; or the doors are kept open by
some obstacle; or the appliance is located with
insufficient clearance at the sides, back and top.
Temperature
inside is too
cold
Increase the temperature by following the
“Display controls” chapter.
Doors can't
be closed
easily
Check whether the top of the refrigerator is
tilted back by 10-15mm to allow the doors to
self close, or if something inside is preventing
the doors from closing.
Water drips
on the floor
The water pan(located at the rear bottom of the
cabinet)may not be properly positioned to
direct water into this pan, or the water spout is
blocked. You may need to pull the refrigerator
away from the wall to check the pan and spout.
-19-
Loading ...
Loading ...
Loading ...