Loading ...
Loading ...
Loading ...
8
1. Remove the product from the box.
2. Remove any packaging from the product.
3. Please retain all packaging until you have checked and counted all the parts
and the contents against the parts list.
4. Dispose of the packaging in a responsible manner.
Filling the tank with water:
1. To use this handheld steamer, start by filling up the water tank.
2. To access the water tank, remove the safety cap at the top of the unit by
turning it counter-clockwise to loosen it. Once it has come fully loose, pull it
away from the body of the unit and set it to one side.
3. Place the included funnel on the water tank opening and use the included
measuring cup to carefully pour water into the tank. Be careful not to put in
more water than necessary, to avoid waste.
4. Once the water tank has been filled with the required quantity of water,
replace the safety cap and turn it clockwise to tighten and secure the water
inside the tank.
Turning the Unit On and Off:
1. When the unit has been filled with water, plug it into the mains. The LED
indicator at the side of the unit will light up amber to indicate the unit has
been plugged in and is heating up.
2. When the unit has reached the correct temperature for steaming, the amber
LED indicator on the side of the unit will go out. This indicates the unit is ready
for normal use.
Note: The unit will typically take 3- 5 minutes to heat up.
3. When the unit has heated up and is ready to use, push the On/Off switch on
the handle to the On position and press down on the steam trigger to begin
steaming. Steam will emit from the nozzle to indicate the unit has been turned
on.
4. Release the switch and de-press the trigger at any time to stop steaming. The
switch will automatically return to the Off position and steam will stop emitting
from the nozzle to indicate the unit has been turned off.
4 - Before First Use
5 - Using Your Appliance
Loading ...
Loading ...
Loading ...