Germ Guardian AC4825E Air Purifier with HEPA 13 Filter

USE & CARE INSTRUCTIONS - Page 7

For AC4825E. Series: AC4825
Also, The document are for others Germ Guardian models: AC4825*, AC5000*

PDF File Manual, 30 pages, Read Online | Download pdf file

AC4825E photo
Loading ...
Loading ...
Loading ...
AIR CLEANING LAYERS
Main Unit
UV-C
Bulb
UV-C
Metal
Shield
Rear Cover
with Air
Inlet Grill
Lock & Release
Button
AC4825 SERIES
Main Unit
UV-C
Bulb
UV-C
Metal
Shield
Combination
Filter C includes
Pre/Charcoal &
True HEPA filters
Lock & Release
Button
AC5000 SERIES
Combination
Filter B includes
Pre/Charcoal &
True HEPA filters
Rear Cover
with Air
Inlet Grill
E-6
E-7
OPERATING INSTRUCTIONS
OPERATING THE AIR PURIFIER:
1. Turn the air purifier ON by rotating POWER KNOB clockwise.
2. Upon turning the air purifier ON, the power indicator will be lit (green) and the unit will
be in LOW mode ( ).
3. Rotate the POWER KNOB clockwise to set the air purifier to MEDIUM ( ) or High mode ( ).
4. To activate the UV-C Bulb, press the UV button. Press the button again to turn OFF the UV-C Bulb.
5. To turn the unit OFF, rotate the POWER KNOB counter-clockwise to OFF mode (•).
FILTER REPLACEMENT
5. Reattach the Rear Cover of the unit and securely latch into place.
6. Push and hold UV Control Button for 5 seconds to reset Filter Change Indicator.
CHANGE FILTER INDICATOR
The green power light on the air cleaner will turn red and flash continuously indicating that it is time
to replace the filter. Replace the filter according to the directions then press the UV control button
and hold for 5 seconds to restart the system. The light will turn back to green. Depending on usage,
filter will last approximately 6 months.
REPLACE FILTER
1. Turn off and unplug
the unit.
3. Remove the used
Combination Filter.
4. Insert new Combination Filter
into the unit. Consult the arrow
on the filter for correct
installation direction.
2. Press the Lock & Release
Button and remove the Rear
Cover from the unit.
CHECKING AND MAINTAINING FILTER
Maintain the filter by checking it frequently.
Depending on air quality conditions, you may need to replace it more frequently.
Vacuum the carbon filter layer as needed to remove loose debris and dust and to help prolong
the life of your filter.
To check the status of the filter, peel back the carbon layer to expose the pleated filter.
If the filter is no longer white and is covered in grey dust/dirt it should be replaced.
IMPORTANT: Do NOT try to wash and re-use the Combination Filter.
IMPORTANT: Use Guardian Technologies GENUINE Replacement Parts only.
BEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and bag.
2. Select a firm, level and at location for the air purifier .
* For proper air flow, locate the unit at least 1 foot from any wall or furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a 120V AC outlet.
IMPORTANT: When moving the air purifier, always lift unit by the carrying handle located on back.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...