Loading ...
Loading ...
Loading ...
Changing your HEPA filter
The MyDyson™app and the LCD screen will alert you when your filter life is
running low. Replacement filters are available to buy on www.dyson.com
Remove the conic amplifier
Slide the Release button on the back of the conic amplifier to unlock.
Lift the conic amplifier off your machine.
Lift the outer cover off the base of your machine.
Remove the filter
The HEPA filter is located in the outer cover. Press the filter release buttons
located on the inner rim and lift the outer cover off the filter.
Dispose of the filter.
Install a new filter
Remove your replacement filter from any packaging. Place the filter
on the base of your machine.
Place the outer cover over the filter and press down until it clicks
securely into position.
Place the conic amplifier on your machine and rotate until it clicks
securely in position.
Plug in, switch on and reset your filter life.
Reset your HEPA filter life
It’s important to reset the filter life after replacing your filter.
Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five,
until a tick appears on the screen.
The filter life has been reset and your machine is ready to use.
5
sec
Loading ...
Loading ...