Loading ...
Loading ...
Loading ...
33
CARE AND CLEANING
Oven clean
This function performs a cleaning cycle by injecting steam into the cavity for 15 minutes.
At the end of the cycle, any crusting that may have formed due to high-temperature
cooking inside the oven cavity, will be softened and become much easier to remove.
1 Press . Press to select and confirm your selection by pressing .
2 To cancel this function press and then press .
IMPORTANT!
Once the functions have been completed, a circuit discharge request will be sent
(see WATER DISCHARGE paragraph).
Circuit clean
This function performs a cleaning cycle of the circuit, to keep it clean and operating
efficiently. Press
. Press to select and confirm your selection by pressing .
IMPORTANT!
Once the functions have been completed, a circuit discharge request will be sent
(see WATER DISCHARGE paragraph).
This oven does not require any descalers to keep the steam generation system
running efficiently.
Circuit discharge
At the end of any steam function, when the oven is turned off. The following message
will appear on the display: NEED TO DISCHARGE/OPEN THE DOOR.
Carefully open the door as hot steam will be released. A message will appear
on the display to remove the container and empty the water to the level indicated.
When the water has been emptied, re-insert the container and press
.
At the end of this function, the
message DISCHARGE ENDED
REMOVE AND EMPTY THE
TANK will appear on the display,
confirming that the discharge
was successful.
If you do not wish to immediately
repeat a new steam cooking
cycle, it is recommended to
empty the container refill it
with fresh water, reinsert the
container and close the door.
The oven is now ready for
a new cooking cycle.
Loading ...
Loading ...
Loading ...