Loading ...
Loading ...
Loading ...
.A,.TE.A.OESO.EOOLE
FILL IN DATES /_/_X'x_'_/_ _ "
AS YOU COMPLETE /__/_ _4 _/_/O.Oq._"
REGULAR SERVICE /_¢/_4¢_#VSERVICE DATES
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
T ROS Systems I_
R Check for Loose Fasteners If I_s
A Sharpen/Replace Mower Blades 1_3
C Lubrication Chart I_ If
0 Check Battery Level _4
a Clean Battery and Terminals I_
Check Transaxle Cooling v"
Check V-Belts If
Check Engine Oil Level If I_
Change Engine Oil (with oil filter) 1_1,2
E Change Engine Oil (without oil filter) 11_1,2 I_
N Clean Air Filter _2
G Clean Air Screen 11_2
N_ Inspect Muffler/Spark
Arrester
v'
E Replace Oil Filter (If equipped) _1,2
Clean Engine Cooling Fins If 2
Replace Spark Plug I_ If
Replace Air Filter Paper Cartridge _1_ 2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum.
Do not overtighten,
dPSF
Zerk
LUBRICATION CHART
_Front Wheel
Bearing .... =='
Zerk
, s
@Engine ,.
i
_i_ General Purpose Grease
@ REFER TO Maintenance "ENGINE" SECTION
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
Spindle
Zerk
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18
Loading ...
Loading ...
Loading ...