Loading ...
Loading ...
Loading ...
10
10.0 Troubleshooting EMN-9 Electric Notcher
Table 2
Symptom Possible Cause Correction *
Machine appears to
labor during cutting.
Machine capacity exceeded. Use materials within rated capacity.
Improper lubrication. Follow lubricating guidelines.
Edges of cut are rough
or rolled.
Blade gap incorrect. Adjust blade gap.
Insufficient workpiece material on both
sides of blade.
Make sure workpiece lengths on both
sides of blades are approx. 8 times
workpiece thickness.
Poor cut quality.
Machine capacity exceeded. Use materials within rated capacity.
Blades dry; improper lubrication. Follow lubricating guidelines.
Blades dull or damaged. Resharpen or replace blades.
Blades are loose. Check all blades for tightness.
* WARNING: Some corrections may require a qualified electrician.
11.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET.
Some parts are shown for reference only, and may not be available individually.
Loading ...
Loading ...
Loading ...