Loading ...
Loading ...
Loading ...
6
ENGLISH
(Original instructions)
7
ENGLISH
(Original instructions)
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Problem Step Possible solution
The steam mop is not
turning on
1. Check the unit is
plugged in at the wall
socket.
2. Check the unit is
switched on using the
ON/OFF switch (1)
3. Check the fuse in the
plug.
The steam mop is not
producing steam
4. Check the water tank
(3) is full and correctly
tted.
NOTE: When rst lled
or after running dry it
can take up to 45
seconds for steam to
be produced.
5. Check the steam
generation button is in
the ON position.
The steam mop is
producing too
much steam during
use.
6. The steam mop has 3
settings. Vary
thumbwheel control dial
(10) to reduce the
amount of steam being
produced.
The steam mop is
producing too
little steam during
use.
7. The steam mop has 3
settings. Vary
thumbwheel control dial
(10) to increase the
amount of steam being
produced.
The steam mop stops
producing steam
during use
8. Check step 1, then 2,
then 3.
The steam mop stops
producing too little
steam during use
9. Check step 4, then 2,
then 3
The steam mop is
producing too little
steam during use
10. Check step 4
Where can I get
further information/
accessories for my
steam mop
11. Refer to the assembly
chapter of the manual
for correct tting of
parts and
accessories.
Loading ...