Loading ...
Loading ...
Loading ...
7
[1] MIC INPUTS
RCF F 6X provides 2 mono Mic inputs via XLR connectors. The Balanced XLR Microphone preamp input
provides a gain range from 0 dB to -50 dB. All the F 6X’s MIC-LINE inputs are supplied with an 80 Hz
Hi-pass filter. Enable the 80 Hz Hi-Pass filter when using voice microphone to reduce low frequency
pop, bump and rumble noise (see section [7] of this manual). +48 V Phantom Power is provided for the
Mic input: 1-2. Enable the Phantom power in the presence of Condenser and Electret Microphones or
in the event of D.I. box usage (see section [9]).
[2] LINE INPUTS
Line inputs TRS jack 1 and 2 provide a gain of +20 dB to -30 dB to line level signals.
[3] STEREO INPUTS
RCA and TRS jacks 3/4 and 5/6 provide stereo inputs for line sources. Note that MONO sources can be
connected to jack inputs 3 and 5.
[4] MAIN OUTPUTS
These XLR male connectors provide +4 dB balanced audio output coming from MAIN MIX. Connect
your main speaker system to XLRs, named L and R. The audio level of MAIN MIX OUT L and R is
controlled by the dedicated MAIN MIX rotary knob (see section [24] of this manual). L and R XLR MAIN
MIX outputs are replicated with L and R TRS jack.
[5] AUX/FX OUTPUT
This TRS jack connector provides +4 dB balanced audio output from the auxiliary send. Connect your
stage monitors or external effects input here.
[6] FOOTSWITCH
This TS jack connector allows the use of MOMENTARY switches or foot pedals to MUTE and UN-MUTE
the audio from the internal FX return. When the FX is muted via footswitch the red LED near the FX
MUTE button lights up (see the section [23] of this manual). In this state, the effect can be unmuted
either by pressing the FX MUTE button or the FOOTSWITCH again.
[7] CHANNEL 1 AND 2 GAIN
MIC input (XLR). This control permits the gain for MIC input to be set with a range from 0 dB to -50 dB.
If the LINE INPUT (TRS jack) are in in use the gain range permitted is from +20 dB to -30 dB.
[8] CHANNEL 3/4 AND 5/6 GAIN
STEREO LINE INPUT (TRS jack). The control allows a gain range from +20 dB to -30 dB.
[9] +48 V SWITCH
Dedicated to the Mic input this switch allows the enabling of the +48 V Phantom Power to the
Mic input 1-2. Enabling the Phantom power is necessary in the presence of Condenser and Electret
Microphones or in case of D.I. box usage.
ON
OFF
FRONT PANEL FUNCTIONS
ENGLISH
Loading ...
Loading ...
Loading ...