Loading ...
Loading ...
Loading ...
8
Flexible zone
This may be used as one complete hotplate or two individual
hotplates depending on the actual cooking needs.
Operation.
It consists of several independently controlled inductors. When
the zone is working, those inductors that are not covered by
cookware are automatically turned off.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
■ in the upper or lower part of the flexible zone, when the
cookware is smaller than 13 cm (see diagram)
■ or in one of the two halves of the flexible zone, when the
cookware is larger than 13 cm (see diagram).
When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
Consisting of two independent zones
The flexible zone can be used normally as two independent
hotplates.
How to activate
See “adjusting the hotplate“ section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
1.Place the cookware and select the desired power level with
one of the two controls in the flexible zone.
2.Press the û symbol.
The
û indicator lights up. The flexible zone been activated.
3.To change the power level: use the same control as above to
change the power level.
To add more cookware
Press the symbol
û to start the search and detection of the new
cookware.
To deactivate
press the
ú symbol. The flexible hotplate has been
deactivated.
To switch off the hotplate, turn the switch to position 0.
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To turn on: press and hold the
@ symbol for
approx. 4 seconds. The
@ indicator lights up for 10 seconds.
The range is locked.
To turn off: press and hold the
@ symbol for
approx. 4 seconds. The lock is now deactivated.
The hob is locked
If a hotplate is programmed with the hob locked, the following
will occur:
■ On the hotplate's indicator, ‹ will flash or the residual heat
indicator will flash alternately with
‹.
■ The indicator light over the symbol @ will come on.
Switch off the hotplate. Switch off the lock.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Use limitations
This function may be used for all hotplates, provided that the
other hotplate in the same group is not switched on (see
figure). Otherwise,
› and the power level will flash on the
selected hotplate display; the previously selected power level
will then be automatically set, without turning on the function.
!FP FP
*URXS
*URXS
*URXS
*URXS
Loading ...
Loading ...
Loading ...