NPTGSP2617A User Manual

Loading ...

ASSEMBLY

FITTING THE DEBRIS GUARD (See Figs. 1-2)

WARNING

The trimmer line cutting blade on the debris guard is sharp and is fitted with a blade protection film

which will need to be removed prior to using the trimmer. When fitting the guard avoid contact with the

blade. Failure to avoid contact can result in serious personal injury.

■ Fit the outer part of the debris guard with the part attached to the shaft, ensuring that the screws and holes

align (Fig. 1).

■ Secure the screws tightly using the hex wrench (Fig. 2). Do not over-tighten.

INSTALLING AND REMOVING THE SHAFT (See Figs. 3-7)

WARNING

Never install, remove, or adjust any attachment while the engine is running. Failure to stop the engine

can cause serious personal injury.

To install the shaft:

■ Loosen the locking knob on the shaft connection sleeve counter-clockwise.

■ Align the axles in the shafts. Pull out the locking pin, and then insert the shaft into the shaft connection

sleeve (Fig. 3 & 4).

Fig. 3

Fig. 4

Fig. 1

Fig. 2

Loading ...

LawnMaster NPTGSP2617A No-Pull Gas Grass Trimmer with Electric Start 26cc 2 Cycle 17-Inch