Loading ...
Loading ...
Loading ...
About the controls on the air conditioner
Vent Control
Thevent controlislocatedbehindthe frontgrilleon the
right sideof the air dischargearea.WhenCLOSED,only
the airinsidethe roomwill becirculatedand conditioned.
WhenOPEN,the ventallowsoutdoorfresh airexchange.
Toopenor closethe vent:
1. Removethefront grille.
2. Removetheventcard screw.
3. Removeventcard,turn it overandreplaceit by
locatingrearholein cardoverlocatingpin insideair
dischargeandreattachingscrewat front.
Theunitleavesthefactorysetat the CLOSEposition.
ocatinghole
N_N
OPENposition
(Mesh end toward back)
Locatinghole
CLOSEposition
(Mesh end toward front)
Air Direction
Horizontallouvers
onthefront grille
letyoucontrolthe
airdirectionup and
down.
front grille
tjustthe vertical
louversside-to-side
to directtheair left
ht.
Auxiliary Controls - Dip Switches (location varies by model)
The auxiliary dip switch controls are located
behind the room cabinet-as shown in this figure.
The owner is responsiblefor checking switches
and ensuring they are in the desired position.
F
FanCycle/Continuous- Cool
X
FanCycle/Continuous - Heat (on some models)
\
_ Class 2 (on some models)
r_ Nofunction(reserved
Fan Cycle/Continuous - Cool
When this switch is enabled (UPLit allows the indoor
fan to cycle on/off with the compressor. When this
switch is disabled (DOWN),it allows the indoor fan to run
continuously. The default setting is down (continuous).
r FanCycle/Continuous- Cool
Fan Cycle/Continuous - Heat (on some models)
When this switch is enabled (UP),it allows the indoor
fan to cycle on/off with the heater operation. When this
switch is disabled (DOWN),it allows the indoor fan to run
continuously. The default setting is UP(cyclic).
e/Continuous -
Heat (on some models)
Class 2 - Remote Thermostat (on some models)
When this switch is enabled (UP),it allows the unit
to operate with a Class2 Remote Control Wall
Thermostat. The unit controls are disabled.
The default setting is down (disabled).
- Eass2 (onsomemodels)
Loading ...
Loading ...
Loading ...