Loading ...
Stainless Steel Models
Setting of circulation air door - single fan models
IMPORTANT: SET CIRCULATING MODES BEFORE INSTALLING THE HOLE PLUGS.
Ducted installation
Setting of circulation air doors - dual fan models
Select required exhaust outlet, remove hole
plug and snap t ue exhaust collar.
Before installing the cooker hood, remove all protective plastic covering from stainless steel surfaces.
Use at least 4 screws (not provided) and the mounting holes provided to securely mount the cooker hood. Make sure that the cooker hood is level
and free from twist.
Warning: Failure to install the screws or xing device in accordance with these instructions may result in electrical hazards.
c
L
c
L
60
100
79
25
25
30
25
Air Recirculating Outlet
Rear Fixing Points (4)
143
Recommended
Top Fixing Points
Recommended
90cm wide models
60cm wide models
nominal width 598
nominal width 898
(use 2 from each end)
160
500
Top and Rear Exhaust Outlets
35
300
30
105
The maximum space between
the wall and screw cap is 5mm
RECIRCULATE
EXHAUST
RECIRCULATE
EXHAUST
Loading ...
Loading ...