Loading ...
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: LT01
Fastening capacities Machine screw 4 mm - 8 mm (5/32" - 5/16")
Standard bolt M4 - M12 (5/32" - 1/2")
High tensile bolt M4 - M8 (5/32" - 5/16")
No load speed 0 - 2,000 /min
Impacts per minute 0 - 3,000 /min
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm (14-1/4" - 15")
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1016 / BL1021B / BL1041B
Charger DC10SB / DC10WD
Net weight 1.2 - 1.6 kg (2.7 - 3.6 lbs)
Model: LT02
Fastening capacities Standard bolt M4 - M12 (5/32" - 1/2")
High tensile bolt M4 - M8 (5/32" - 5/16")
Square drive 9.5 mm (3/8")
No load speed 0 - 2,000 /min
Impacts per minute 0 - 3,000 /min
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm (14-1/4" - 15")
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1016 / BL1021B / BL1041B
Charger DC10SB / DC10WD
Net weight 1.2 - 1.6 kg (2.7 - 3.6 lbs)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
Loading ...
Loading ...
Loading ...