Loading ...
Loading ...
Loading ...
Set Forward/Reversing lever to the center (off
position). Slide charged battery pack into the
housing until the battery pack locks into
position (Fig. 9).
Your tool is equipped with a secondary locking
latch to prevent the battery pack from
completely falling out of the handle, should it
become loose due to vibration.
To remove the battery pack, press the battery
pack release button and slide the battery pack
forward (Fig. 10).
Press the battery pack release button again
and slide the battery pack completely out of
tool housing (Fig. 10).
"&%'""% &"''%,$
-12-
(&' ('
Your tool features 26 clutch settings. Output
torque will increase as the clutch ring, is
rotated from 1 to 25. The drill “ ” position
will lock up the clutch to permit drilling and
driving heavyduty work, and also enables bits
to be changed quickly and easily in the
keyless chuck (Fig. 7).
%
When the trigger switch is released it
activates the brake to stop the chuck quickly.
This is especially useful in the repetitive
driving and removal of screws.
( '"*#% '
Your tool is also equipped with a light that turns
on automatically when the switch is activated,
for better visibility when drilling/driving (Fig. 1).
% !!%% & '#%%"
!<129<;9F
The selector ring allows the tool to be set for
various drilling/hammer drilling applications.
Rotate the selector dial right or left depending
on the below applications (Fig. 8).
Drill only action: For drilling in woods, metals,
plastics or other non concrete materials.
Drill with hammer action: For drilling in
concrete, asphalt, tile or other similar hard
materials. The hammer drill position overrides
the clutch for hammer drilling.
ADJUSTABLE
CLUTCH
FIG. 7
MODE
SELECTOR
RING
FIG. 8
1
2
BATTERY PACK
RELEASE BUTTON
FIG. 9
FIG. 10
BATTERY PACK
BM 2610027757 08-12_BM 2610027757 08-12.qxp 8/17/12 1:32 PM Page 12
Loading ...
Loading ...
Loading ...