Tripp Lite SMART1000RM2UN Owner's Manual

Loading ...

Installation

2 - Dynamic IP Address Assignment

2-1

Connect WEBCARDLX / WEBCARDLXE / WEBCARDLXMINI to Network:

Connect a standard Ethernet patch cable to your network using the RJ45

Ethernet port on your WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI.

Note: This port does not support PoE (Power over Ethernet) applications.

The card will attempt to obtain an IP address via DHCP. This may take as long as

several minutes, depending on your network environment.

2-2

Determine IP Address: To identify the IP address assigned to the WEBCARDLX,

WEBCARDLXE or WEBCARDLXMINI, contact your network administrator and

provide the MAC address of the WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI.

You can also determine the IP address locally at the card. If you do not already

have the serial over USB driver installed on your PC, you can download it from

tripplite.com/support by typing WEBCARDLX in the search field. Select the driver

named “TL-cdc”. To install it, follow the instructions provided with the driver.

Once the driver is installed and the COM port has been assigned, start a

terminal emulation program, such as Tera Term Pro. Configure it to use the

assigned COM port and use the following serial port settings: 115.2Kbps, 8,

NONE, 1. Connect the USB cable to the PC and the Micro-USB end to the

Micro-USB port on the WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI. When

the login prompt appears, login as localadmin / localadmin. When the Menu

appears, navigate to "3- Network Configuration", then to "1- IP Configuration".

The assigned IP address will be displayed. After you have determined the IP

address, proceed to 4 - Test and Configure.

Note: You may wish to request a long-term lease period for the IP address, depending on

your application.

Note: PowerAlert

Device Manager and the WEBCARDLX, WEBCARDLXE or

WEBCARDLXMINI support both IPv4 and IPv6. The card is set up by default to receive a

DHCP address for IPv4, IPv6 or both. Receiving both addresses allows connection to the

card via either the IPv4 or IPv6 address.

Loading ...

Tripp Lite SMART1000RM2UN SmartPro 120V 1000VA 800W Line-Interactive Sine Wave UPS, 2U, WEBCARDLX, LCD, USB, DB9, 6 Outlets