Garmin 010-01982-00 DriveTrack 71

User Manual - Page 25

For 010-01982-00.

PDF File Manual, 30 pages, Read Online | Download pdf file

010-01982-00 photo
Loading ...
Loading ...
Loading ...
7
Select an option:
To install all available updates, click Install All.
To install a specific update, click View Details, and click
Install next to the update you want.
The Garmin Express application downloads and installs the
updates onto your device. Map updates are very large, and
this process may take a long time on slower internet
connections.
NOTE: If a map update is too large for the internal storage of
the device, the software may prompt you to install a microSD
®
card in your device to add storage space (Installing a
Memory Card for Maps and Data, page 22).
8
Follow the on-screen instructions during the update process
to finish installing updates.
For example, during the update process, the Garmin Express
application may instruct you to disconnect and reconnect
your device.
Installing Garmin Express
The Garmin Express application is available for Windows
®
and
Mac
®
computers.
1
On your computer, go to garmin.com/express.
2
Select an option:
To view the system requirements and verify the Garmin
Express application is compatible with your computer,
select System Requirements.
To install on a Windows computer, select Download for
Windows.
To install on a Mac computer, select Download for Mac.
3
Open the downloaded file, and follow the on-screen
instructions to complete the installation.
Device Care
NOTICE
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Do not expose the device to water.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic
components.
1
Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2
Wipe the device dry.
Cleaning the Touchscreen
1
Use a soft, clean, lint-free cloth.
2
If necessary, lightly dampen the cloth with water.
3
If using a dampened cloth, turn off the device and disconnect
the device from power.
4
Gently wipe the screen with the cloth.
Avoiding Theft
Remove the device and mount from sight when not in use.
Remove the residue left on the windshield by the suction cup.
Do not keep your unit in the glove compartment.
Register your device using the Garmin Express software
(garmin.com/express).
Resetting the Device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount, and Suction
Cup
Removing the Device from the Mount
1
Press the release tab or button on the mount.
2
Tilt the bottom of the device upward, and lift the device from
the mount.
Removing the Mount from the Suction Cup
1
Turn the device mount to the right or left.
2
Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windshield
1
Flip the lever on the suction cup toward you.
2
Pull the tab on the suction cup toward you.
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1
Rotate the end piece counter clockwise to unlock it.
TIP: You may need to use a coin to remove the end piece.
2
Remove the end piece, the silver tip , and the fuse .
3
Insert a new fast-blow fuse that has the same current, such
as 1 A or 2 A.
4
Place the silver tip in the end piece.
5
Push in the end piece and rotate it clockwise to lock it back
into the vehicle power cable .
Troubleshooting
My dogs do not appear on my screen
Verify your compatible handheld device is within 3 m (10 ft) of
your Garmin DriveTrack device.
Verify broadcasting is enabled on your handheld device
(Receiving Data From Your Handheld Device, page 2).
Verify your collars are turned on and connected to your
handheld device.
For more information, see the owner's manual for your
handheld device.
Troubleshooting 21
Loading ...
Loading ...
Loading ...