Loading ...
Loading ...
Loading ...
18
HEPA filter
Turn the HEPA filter anticlockwise for unlocking it from the filter seat.
Pull it off from the water valve.
Clean the surface of the HEPA filter with a brush.
Wash it with water under 40 ℃gently.
Dry it for 24 hours.
TROUBLE SHOOTING
WARNING: Read instruction manual first! Remove battery pack from the tool before
making adjustments or assembling accessories.
Problem Possible Cause Possible Solution
Vacuum will not operate
Battery pack not installed
properly Check battery pack installation.
Battery pack not charged. Check battery pack charging
requirements.
Battery pack will not charge.
Battery pack not inserted into
charger.
Insert battery pack into charger
until LED appears
Charger not plugged in
Plug charger into a working
outlet.
Surrounding air temperature
too hot or too cold
Move charger and battery to a
surrounding air temperature of
above 40 degrees F(4.5°C)
or below 105 degrees
F(+40.5°C)
Dust comes out from motor
cover.
The filter is missing or
damaged. Attach or replace filter.
Reduced efficiency and
motor/speed vibration.
There is a blockage in the
nozzle, hose, or the container
inlet.
The filter is clogged by fine
dust.
Check nozzle, hose and
container inlets for blockage.
Take off the filter and clean it.
Or install a new filter.
Loading ...
Loading ...
Loading ...