Loading ...
Loading ...
Loading ...
Note: If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the
User’s Guide or visit
www.lexmark.com.
Replace jammed originals if restarting job.
Try one or more of the following:
• Touc h Cancel job to clear the message and cancel the scan job.
• Touc h Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
• Touc h Scan from
flatbed
to continue scanning from the scanner immediately after the last successful
scan job.
• Touc h Finish job without further scanning to end the last successful scan job.
• Touc h Restart job to restart the scan job with the same settings from the previous scan job.
Replace last scanned page and jammed originals if restarting job.
Try one or more of the following:
• Touc h Cancel job to clear the message and cancel the scan job.
• Touc h Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
• Touc h Scan from
flatbed
to continue scanning from the scanner immediately after the last successful
scan job.
• Touc h Finish job without further scanning to end the last successful scan job.
• Touc h Restart job to restart the scan job with the same settings from the previous scan job.
Replace maintenance kit, recommended life exceeded [80.xy]
The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or
contact your service representative.
Replace maintenance kit to resume printing [80.xy]
The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or
contact your service representative.
Replace missing cartridge [31.xy]
Install the missing cartridge to clear the message. For more information, see “Replacing the toner cartridge”
on page 255.
Replace missing fuser [80.xx]
1 Install the missing fuser. For more information, see the instruction sheet that came with the replacement
part.
2 From the control panel, touch Supply replaced to clear the message.
Troubleshooting 306
Loading ...
Loading ...
Loading ...