Loading ...
Loading ...
Loading ...
en Avoiding material damage
12 Printed on 100% recycled paper
Do not use the appliance with damp hands.
Never operate a damaged appliance.
Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
Never place the appliance on or near hot surfaces.
After switching off, wait until the drive has come to a complete
standstill.
Keep hands, hair, clothing and utensils away from rotating parts.
Never touch the edges of the blades with bare hands.
Care should be taken when handling sharp blades, emptying the
container and during cleaning.
Be careful when processing hot food.
Leave boiling food to cool down to at least 70°C before pro-
cessing.
Follow the cleaning instructions.
Clean surfaces which come in contact with food before each
use.
Avoiding material damage
Do not operate the appliance at no-load.
Never use the blender jug in the mi-
crowave or oven.
Place the base unit fully on the blender
foot or accessory and lock into position
with a click.
Overview
→Fig.
1
1
Switch-on lock
2
Control lever
3
Release buttons
4
Blender foot
1
5
Plastic blender jug
1
6
Whisk
1
2
7
Universal cutter
1
2
1
Depending on the model
2
separate operating instructions
Note:If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Controls
Control lever with switch-on lock
You can use the control lever for stepless
control of the speed of your appliance.
To switch on the appliance, first press the
switch-on lock and then the control lever.
The more firmly the control lever is pressed,
the higher the speed of the motor.
Note:The appliance remains switched on
as long as the control lever is pressed.
→Fig.
2
Blender feet
Note:The blender feet are not suitable for
preparing purées consisting only of pota-
toes or foods with a similar consistency.
The blender feet are suitable for the
following purposes:
¡ Mixing drinks
¡ Making pancake batter, mayonnaise,
sauces and baby food
¡ Puréeing cooked food, e.g. fruit, veget-
ables, soup
Loading ...
Loading ...
Loading ...