Loading ...
Loading ...
Loading ...
17
Dryer / User Manual
6 Maintenance and cleaning
C
NOTE
• Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
Sensor (models with a sensor)
There are humidity sensors in your dryer that
detect whether the laundry is dry or not.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if drying
has been carried out.
3. Wipe the metal sensors with a soft cloth,
dampened with vinegar and dry them.
C
NOTE
• Clean metal sensors 4 times a year.
A
WARNING!
• Never use solvents, cleaning agents
or similar substances when cleaning
since these materials can cause fire and
explosion!
Lint filter
Lint and fibres released from the laundry to the
air during the drying cycle are collected in the
“Lint Filter”.
C
NOTE
• Such fibre and lint are generally formed
during wearing and washing.
• Always clean the filter after each drying
process.
• You can clean the filter and filter area by
vacuum cleaner.
Figure 1
Figure 2
To clean the filter:
1.Take out the cover.
2.a) If the product’s lint filter can be opened
as shown in Figure 1, remove the filter by
pulling it up and open the filter.
2.b) If the product’s lint filter is as shown in
Figure 2, remove the filter by pulling it up.
3. Clean lint, fibre, and cotton raveling on the
filter and in the filter housing by hand or
with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
Loading ...
Loading ...
Loading ...