Loading ...
Loading ...
Loading ...
ECI-B12Fx Network Bullet Camera Quick Start Guide
QSG VE ECI-B12Fx 060118NA 9
NOTES:
The supplied screw package contains both self-tapping screws and
expansion bolts.
If the ceiling is cement, expansion bolts are required to fix the camera. If
the ceiling is wood, self-tapping screws are required.
5. Connect the corresponding power cord, and network cable.
6. Power on the camera.
7. Set the network configuration (for details, refer to 3 Set the Network
Camera over the LAN and 4 Access via Web Browser) to check if the
image is at an optimum angle. If not, adjust the surveillance angle.
1) Loosen the no.1 adjusting screw to adjust the rotation position [0° to
360°].
2) Tighten the no.1 adjusting screw.
3) Loosen the no.2 adjusting screw to adjust the tilting position [-90° to
90°].
4) Tighten the no. 2 adjusting screw.
5) Loosen the no.3 fix ring to adjust the pan position [0° to 360°].
6) Tighten the no.3 fix ring.
3-Axis Adjustment
8. (Optional) Install the waterproof jacket. Refer to 2.3 Waterproof Jacket
for details.
2.2 Ceiling/Wall Mounting with Junction Box
Before You Start
Both wall mounting and ceiling mounting are suitable for the bullet
camera. Wall mounting will be taken as an example in this section. Use
these wall mounting steps as a reference for ceiling mounting.
Loading ...
Loading ...
Loading ...