Loading ...
Loading ...
Loading ...
31
● Adaptation on Audi A8 - allows to set new pad thickness of rear brakes calipers after
changing brake discs & pads on Audi A8 models.
● Replace hydraulic brake systems fluid/bleed brake system on Mercedes SBC vehicles
- allows to change brake fluid/bleed brake system.
● Perform service reset and service position on BMW EPB vehicles - allows to do the
CBS reset and CBS correction for front brake and rear brake.
● Perform activation/service work on Volvo PBM vehicles - allows to perform installation
check, applying parking brake, releasing parking brake, activating service mode and exiting
service mode.
● Reset memory on Toyota EPB vehicles - allows to clear the learned memory of the EPB
ECU.
● Perform brake cable replacement and electric parking brake replacement - allows to fit
in or remove the brake cable safely, adjust brake cable’s tension and calibrate the electric
parking brake replacement.
● Save and write clutch pedal programming on Renault EPB vehicles - allows to save
clutch pedal programming on Renault vehicles fitted with manual gearbox. After this
command is activated, the tool allows to "flash" the electric parking brake unit with the saved
clutch data.
● Perform control function and reset function on Opel EPB vehicles - allows to
apply/release park brake cable service, provide park brake cable service replacement
procedures and calibrate the parking brake systems after brake service.
● Sensor calibration on Honda EPB vehicles - allows to program the current output value of
each sensor into the electric parking brake unit.
● Provides parking brake unjam procedure and perform longitudinal accelerometer
calibration on Land Rover EPB vehicles - allows to drive the electronic park brake so it is
unjamed in the releasing direction and then drive it into mounting position or the latching
position; also allows to perform longitudinal accelerometer calibration.
● EPB systems must be deactivated before carrying out any maintenance/service work on the
brakes such as changing of pads, discs and calipers.
● Use proper tools to avoid the risk of body injuries of mechanics and technicians and damage
to the brake system.
● Make sure the vehicle is properly blocked after deactivation of the systems.
6.3 Tire Pressure Monitoring System (TPMS) Programming
TPMS Service menu allows you to check the tire sensor IDs from the vehicle ECU and to
perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires
are rotated.
6.4 Steering Angle Sensor (SAS) Calibration
SAS Calibration menu let you perform calibration of the Steering Angle Sensor, which
permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM.
On successful calibration of the sensor, its fault memory is automatically cleared.
6.5 Diesel Particulate Filter (DPF) Regeneration
DPF Regeneration menu let you perform the DPF cleaning to clear the blockage through
continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle
is completed, the DPF light automatically goes off.
6.6 BRT Operations
BRT menu lets you to new battery validated, how to clear faults from the dashboard and
Loading ...
Loading ...
Loading ...