Loading ...
Loading ...
Loading ...
30
This button can be used to select two
different functions.
- DELAY START
The dishwasher start time can be set with
this button, delaying the start by 3, 6 or 9
hours. Proceed as follows to set a delayed
start:
Choose a programme by pressing the
"PROGRAMME SELECTION"
button.
Press the "DELAY START" button
(each time you press it you can set a
delayed start respectively).
Type A (only on some models)
3h indicator light on
6h indicator light on
9h both indicator light on
Type B (only on some models)
3h indicator light on
6h indicator light on
9h indicator light on
To start the countdown, press the
"START/
RESET" button (the set time indicator
light will start to flash).
If a 9 hour delay is set, countdown will be
displayed by the 6h indicator light after 3
hours and the 3h indicator light after 6
hours.
At the end of the last 3 hours (at the end of
countdown) the 3h indicator light will stop
flashing and remain on to indicate the
washing phase and the programme will
start automatically.
Delayed start can be changed or cancelled
if countdown has has not ended, and
therefore the programme has not yet
started. Select another programme or
select/deselect the option button,
proceeding as follows:
Hold the "RESET" button down for at
least 3 seconds. Some audible signals
will sound and the programme indicator
lights will turn on and off individually and
sequentially.
The delayed start and the selected
programme will be cancelled. The
programme indicator lights will flash, the
dishwasher is ready start programme.
- SETTINGS
The dishwasher is regulated with certain
factory settings. However, from the
SETTINGS
menu, you can adjust
various parameters to suit your washing
requirements.
The parameters adjusted are:
SOFTENER
To adjust the softener, see the specific
chapter of the manual.
BUZZER
Activates or deactivates the acoustic signal
at the end of the programme.
MEMO FUNCTION
To enable storage of the last used
programme.
ENTERING THE SETTINGS MENU
Turn on the dishwasher by holding the
"ON/OFF"
button for approximately 3
seconds.
Hold the "SETTINGS" button for 5
seconds to open the menu. Entering the
settings mode will be indicated by flashes
from several of the indicator lights on the
dashboard.
The dishwasher must ALWAYS be
turned o
ff before you start this
procedure.
DELAY START/SETTINGS OPTION
button
Loading ...
Loading ...
Loading ...