Loading ...
Loading ...
Loading ...
USA
7
Electrical connection
Winning and electrical connections must
follow the local and national electrical
codes. Consult the codes’ lengths and sizes
prior to cabinet installation.
This device complies with relevant EU
directives including Low Voltage Directive
2014/35/EU and Electromagnetic
Compatibility Directive 2014/30/EU
The socket should be freely accessible.
Connect the appliance only to 115V~ 60Hz
alternating current via a correctly installed
earthed socket.
The socket must be fused with a 10-13 A
fuse.
If the appliance is to be operated in a non-
European country, check on the rating plate
whether the indicated voltage and current
type correspond to the values of your
electrical supply.
Information regarding voltage, current, or
power is given on the rating plate
Only a qualified technician may replace the
power cord.
The rating plate provides various
technical information as well as type and
serial number.
Installation and start-up
Placement
For safety and operational reasons, the
appliance shall not be exposed to rain.
The appliance should be placed on a level
surface in a dry, well ventilated room. Never
place the appliance close to sources of heat
and avoid placing it in direct sunlight.
The surface on which the appliance is to be
placed must be level. Do not use a frame or
similar.
The appliance can be installed as a free-
standing unit against a wall or side-by-side
with other appliances (see fig. 5)
Room temperature
The climate class is stated on the
nameplate. This specifies the optimum
room temperature.
Room
climate
class
Max room
temperature
⁰F
Relative
humidity
%
3
77
60
4
86
55
5 104 40
7 95 75
Max. 79 lbs.
fig. 2
Loading ...
Loading ...
Loading ...