Loading ...
Loading ...
Loading ...
©
2016 Escalade Sports
For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
PARTS REQUIRED:
2 pcs - H4 Phillips Round Head Screw
1 pc - P7 Electronic Scorer
1 pc - A5 A/C Adapter
STEP 3:
First, feed the P7 Electronic Scorer plug through hole on one side of the long top apron as shown in
FIGURE 3.
Next, feed the plug through underneath support beams and connect to Main Electronic Unit C2 as
shown in FIGURE 3 and DETAIL A.
IMPORTANT NOTE: This connector will only fit into the C2 Main Electronic Unit if it is turned correctly.
It has two small plastic male tabs on the outside that must fit correctly into it’s female counterpart
socket on the C2 Main Electronic Unit. DO NOT FORCE THIS CONNECTION. A flashlight will be very
helpful to study both the male plug and female socket to insure a correct connection.
Next, install P7 Electronic Scorer onto long top apron using pilot holes with H4 Screws as shown in
FIGURE 3. Tighten, but do not strip out H4 Screws.
Connect A5 A/C Adapter onto Main Electronic Unit C2 (underneath table).
FIGURE 3
H4
P7
P1
C2 Main Electronic Unit
Underneath
Support Beam
A5
A/C Adapter
IMPORTANT NOTE:
Carefully turn connector
sideways and gently push
connector through the hole
in the top rail.
<< DO NOT FORCE ! >>
DETAIL A
FEMALE COUNTERPART
SOCKET ON THE C2
MAIN ELECTRONIC UNIT
MALE CONNECTOR ON
P7 ELECTRONIC SCORER
WITH 2 TABS AS SHOWN
TABS
Loading ...
Loading ...
Loading ...