Loading ...
Loading ...
www.SereneLifeHome.com
WARNING:
1. Never operate this appliance if it has a damaged cord or plug, if it is not working property, if it has been dropped or
damaged or dropped into water, return to a service center for examination and repair.
2. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair and the like.
3. Never drop or insert any object into any opening.
4. Do not use outdoors. For Household Use Only.
5. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Keep the pump away from ammable liquid. The area where the pump is used should be well ventilated.
6. Do not obstruct ventilation hole on pump.
7. Do not open the pump case-electrical hazard may result. No user serviceable parts.
8. Do not over-inate.
9. Unplug from outlet before cleaning.
10. Close supervision is necessary when this appliance is used by, or near children, invalids or disabled persons.
11. Use this appliance only for its intended use as described in this manual.
Do not use attachments unless recommended by the manufacturer.
12. Keep the cord away from heated surfaces.
13. To disconnect turn all controls to the off position then remove plug from outlet.
14. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other).
This plug will t in a polarized outlet only one way, if the plug does not t fully in the outlet, reverse the plug.
If it still does not t contact a qualied electrician to install the proper outlet. Do not change the plug in any way.
15. Power supply for pump must be 120V AC.
16. It is not recommended to plug into the 120V power source unattended when not in use.
17. For proper pump usage, it is recommended not to exceed 5 minutes of continuous ination/deation time.
Pump does not turn off automatically.
18. In case the pump overheats due to excessive continuous ination/deation, the power will automatically cut off,
the pump cool down indicator will be on, and reset to begin working within 30 minutes, then the pump cool down
indicator will be off.
19. The pump included in this airbed is thermally protected.
20. SAVE THESE INSTRUCTIONS.
This appliance is double insulated. In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor is a means for grounding to be
added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system,
and is to be done only by factory qualied service personnel. Replacement parts for a double-insulated product
must be identical to the parts they replace.
NOTE:
Airbed material may stretch during rst use and may need additional air to reach desired rmness. Air inside of bed may
expand and contract with varying temperatures potentially leading to reduced pressure inside of the bed. If this occurs,
simply add more air using the built-in pump to achieve desired rmness.
REPAIRING (Repair kit included)
First, deate the bed by following the instructions for deation. Clean and repair the affected area thoroughly. Cut a
piece of clear patch material (included in the repair kit) into a size that will cover the puncture. Apply the self-adhesive
patch over the affected area by peeling off the backing and placing sticky side down on airbed. Rub patch to ensure
adhesion. Allow four (4) hours for repair to set before attempting to inate the airbed.
IMPORTANT SAFETY INFORMATION AND WARNINGS
Adult supervision required for setup. Warning this is an electrical product. To avoid risk of re, burns, injury, and shock,
it should not be played on or placed near where small children can reach it. Do not use in or around water. Not to be
used outside, this bed is for indoor use only. The
EZ® BED should be placed in an open area before use. Making sure
there are no sharp objects, steps, drops, or breakable objects in the area. Unplug when not being used.
Loading ...