Loading ...
Loading ...
INSTRUCTIONS FOR USE
• If you have long or thick hair, you may find it
quicker and easier to use a hair dryer first to
rough-dry your hair and remove the excess
moisture. For added volume, turn your head upside
down as you dry.
• Once the hair is 80% dry, you should start to
create your style using the styler.
MAXIMUM VOLUME AND BODY
1. Start by sectioning the hair.
2. To turn the appliance on, slide the ON/OFF
switch to the correct heat setting for your hair.
3. Place the appliance into the hair, close to the
roots, and brush through the section to remove
any tangles.
4. For added root lift, hold the brush in place
at the roots for a few seconds.
5. Use the cool setting to set style for
long-lasting results.
6. After use, switch off and unplug the appliance.
7. Allow to cool before storing away.
CLEANING THE FILTER
1. Ensure the unit is switched OFF, unplugged,
and cool.
2. Holding the handle of the unit, grip the rear filter
and turn counterclockwise, as far as the rear filter
will turn, and pull away from the unit.
3. Using a soft brush, clean any hair and other
debris from the fiter.
4. Replace the rear filter by aligning the grooves
and turning clockwise, until the rear filter has
clicked back into position.
.
ADVANCED IONIC TECHNOLOGY
Many aspects of modern living, including air
conditioning, contact with man-made fibers and air
pollution, contribute to a buildup of static electricity
in the hair. Even brushing and towel-drying the hair
can increase these levels, causing the surface of
the cuticle to become rough.
Consequently, hair may have a dull appearance.
Also, high levels of static charge cause hair to
become flyaway and difficult to style.
The powerful ion generator produces a stream of
negative ions that acts to neutralize the static
charge, smoothing the scales on the cuticle for
shiny, smooth and manageable hair, so you can
achieve your desired style easily.
NOTE: The unit may produce a clicking sound
at times, which is normal for a high-output
ion generator.
TITANIUM CERAMIC TECHNOLOGY
The barrel of this premium hot brush is coated with
a combination of the best materials for styling.
A fusion of titanium and ceramic evenly distributes
heat to gently style and protect hair from damaging
hot spots. Hair wraps easily over the surface of this
ultra-smooth barrel.
Barrel is exceptionally easy to clean, and you’ll
discover this combination of technologies leaves
your hair silky smooth.
HEAT SETTINGS
There are 2 heat settings, plus a cool setting.
Use the high heat setting for initial drying, and the
low heat setting as hair begins to dry and for
styling. Use the cool setting to set the style for
long-lasting results. To select the low heat, slide
the ON/OFF switch to the first position; the second
position is for the high heat, and the third position
is for the cool setting.
GET TO KNOW YOUR
HOT AIR SPIN STYLER
Removable
filter cover
2 heat/speed
settings, plus
cool setting
500W
1½ in. titanium
ceramic-coated
barrel with
nylon and ball-
tipped bristles
Powerful ion
generator
Single voltage
6 ft. swivel cord
Loading ...
Loading ...
Loading ...