Loading ...
Loading ...
Loading ...
Owner’s Manual
17
Controls (cont)
Switch Position
The voltage selector switches the main power carrying windings of the generator to produce
120V ONLY or 120/240V.
120V ONLY: ONLY the 120V receptacles can be used. Do not use the 120/240V receptacle in
this position. The most power will be available at the 30A 120V locking plug receptacle.
This unit does not have a voltage select switch.
AC Applications
Before connecting an appliance or power cord to the generator:
• Make sure that it is in good working order. Faulty appliances or power cords can create a
potential for electrical shock.
• If an appliance begins to operate abnormally, becomes sluggish or stops suddenly, turn it off
immediately. Disconnect the appliance, and determine whether the problem is the appliance,
or if the rated load capacity of the generator has been exceeded.
• Make sure that the electrical rating of the tool or appliance does not exceed that of the
generator. Never exceed the maximum power rating of the generator. Power levels between
rated and maximum may be used for no more than 30 minutes.
NOTE
Substantial overloading will open the circuit breaker. Exceeding the time limit for maximum
power operation or slightly overloading the generator may not switch the circuit breaker OFF,
but will shorten the service life of the generator.
Loading ...
Loading ...
Loading ...