Sun Joe 24V-AJV-LTW 24-Volt* IONMAX High-Volume Inflator Kit

OPERATOR’S MANUAL - Page 9

For 24V-AJV-LTW.

PDF File Manual, 16 pages, Read Online | Download pdf file

24V-AJV-LTW photo
Loading ...
Loading ...
Loading ...
9
3. The battery will take approximately 3 hours to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery
mWARNING! This charger does not automatically turn o
when the battery is fully charged. Please take care not to leave
the battery plugged into the charger. Switch o or unplug the
charger at the mains when charging is complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
This high volume inator requires no assembly in order to be
used. Any of the three adpaters may be used for specic tasks.
Attaching the Adapters
This high volume inator is equipped with three inator
adapters. It is recommended to leave them connected, as
disconnecting the adapters may make them easier to lose.
1. To attach an adapter to the inator end, align the notches
on the high volume inator nozzle with the slots on the
adapter of your choice and slide together. Twist the
adapter to lock into place (Fig. 3).
2. To attach an adapter to the deator end, simply snap the
adapter into place (Fig. 4).
Operation
mWARNING! Do not use any attachments or accessories
not recommended by the manufacturer of this high
volume inator. The use of attachments or accessories not
recommended can result in serious personal injury.
mWARNING! The high volume inator is capable of
inating to 0.7 PSI, 0.05 BAR. To avoid over ination, carefully
follow instructions on items to be inated. Never exceed
recommended pressures.
mCAUTION! Do not leave items to be inated unattended
while high volume inator is in use. These items can burst and
could cause serious injury.
Fig. 2
Battery
indicators
Fig. 3
Notch
Slot
Fig. 4
Loading ...
Loading ...
Loading ...