Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/82766640-alt332n-fhs/bgb.png)
VII. d - NOTES TO THE USER:
You only have 20-30 seconds between button pushes. If you take longer than 30 seconds, the controller will revert back to
displaying the cabinet temperature. If you enter the wrong security code, the controller will revert back to displaying the cab-
inet temperature. You can exit the parameters at any time by pressing the alarm cancel button or by waiting 20-30 seconds.
VII. e - ENTER THE CUSTOMER ACCESS: This is required to set any of the control parameters
Use the security code 0, A, 1 and the following instructions:
Press the set button . The display will read Customer/Service Access.
Press the set button .
The display will show three zeros with the left zero ashing .
Press the set button .
The display will show three zeros with the center zero ashing .
Press the down arrow key to sequence through F, E, d, C, b, A, 9, 8, 7,…etc.
When you reach A press set .
The display will show zero, A, zero with the right zero ashing .
Press the up arrow key to sequence through 1, 2, 3, 4, 5, 6, 7, 8, 9, A, b,…etc.
When you reach 1 press set .
The display will read Thermostat Set Point. Press to view and again to exit.
You are now in the CUSTOMER / SERVICE PARAMETERS.
VII. INTELA-TRAUL
®
(continued)
-10-
SET
S E T
S E T
S E T
S E T
S E T S E T
FREEZER
SET
)
)
)
INTELA-TRAUL
°F
LED FOR ° F
3-DIGIT (RED)
LED DISPLAY
ALARM CANCEL
BUTTON
DEFROST ICON
W / LED
DOOR OPEN ICON
W / LED
VII. c - CONTROL PANEL:
Loading ...
Loading ...
Loading ...