Loading ...
Loading ...
Loading ...
ENGLISH
8
Fig. N
17
3
18
Storage (Fig. A, B)
1. Ensure main body
3
is turned OFF.
2. Empty fluid tank of all chemicals. Wash with warm clean
water and dry the formula dispenser tank
6
, chute
17
and nozzle cover
18
. Ensure collection tank
8
is
emptied and cleaned to reduce dirt build up.
3. Check if charging is required by pressing the state of
charge indicator button
22
at the back of the main
handle
2
. If charge is required, plug in the jack plug
21
to charging socket
5
and allow the appliance to charge.
4. Store main body
3
in a cool, dry area.
5. Store main body
3
with the collection tank
8
on a flat
level surface and switch
1
facing up.
6. Store out of reach of children or pets.
TROUBLESHOOTING
If the product does not work, check the following:
• The charger was correctly plugged in for recharge. (It
feels slightly warm to the touch.)
• The charger cord is not damaged and is correctly attached.
• The charger is plugged into a working electrical outlet.
• The switch is in the “OFF” position when charging.
For assistance with your product, visit our website
www.blackanddecker.com for the location of the service
center nearest you or call the BLACK+DECKER help line at
1–800–544–6986.
ACCESSORIES
Recommended accessories for use with your appliance are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
18005446986.
WARNING: The use of any accessory not
recommended for use with this appliance could be
hazardous.
SERVICE INFORMATION
All
BLACK+DECKER
Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
BLACK+DECKER
location nearest you. To find your local
2. Ensure foam filter
15
inside the pre-filter
16
is still
dry. Rinse and wash as necessary.
3. Rinse and wash pre-filter
16
as necessary.
4. Rinse and wash collection tank
8
as necessary.
NOTE: Collection tank
8
and pre-filter
16
are dish
washer safe (top rack only).
5. Ensure all components are completely dry before
re-assembling.
6. Once cleaning is finished, insert foam filter
15
into
the pre-filter
16
.
7. Install the pre-filter
16
into the collection tank
8
,
close and latch the tank, and install it back onto the
main body
3
.
NOTE: Ensure pre-filter
16
. is fully sealed to collection
tank
8
by gently tugging on pre-filter
16
.. If pre-
filter
16
. is loose, fully press the pre-filter
8
into the
collection tank
8
until it snaps into place.
Fig. M
8
15
16
11
Cleaning Chute & Nozzle Cover (Fig. N)
CAUTION: Nozzle cover
18
and
chute
17
are top rack only, dish washer safe. It is
recommended that you manually rinse the nozzle
cover
18
and chute
17
before placing them in the
top rack of the dishwasher.
1. Remove the chute
17
and nozzle cover
18
by pulling
the retention button slightly. Then pull the nozzle cover
18
away from the main body
3
.
2. The nozzle cover
18
can be lifted away from the chute
17
to rinse and wash each component.
3. The nozzle cover
18
and chute
17
are dish washer safe
(top rack only).
4. Ensure the chute
17
and nozzle cover
18
are dry
before re-assembling.
5. Once cleaning is finished, attach nozzle cover
18
onto
the chute
17
and insert into the assembly into the front
of the main body
3
.
NOTE: Ensure the top clip of the nozzle cover
18
fully
snaps into place onto the chute
17
. This may require
extra pushing force.
Loading ...
Loading ...
Loading ...