Tripp Lite B132-100A Owner's Manual

Owner's Manual - Page 17

For B132-100A. Also, The document are for others Tripp Lite models: B130-101-2, B130-101A-2, B130-101-WP-1, B130-101A-WP-2, B130-101S-2, B130-111, B130-111A, B130-101-U, B132-002-2, B132-002A-2, B132-004-2, B132-004A-2, B132-100-1, B132-100-WP-1, B132-100A-WP-1, B132-110, B132-110A

Loading ...

Installation continued

Non-Kit Standard Installation

Note:

1. For models that support EDID copy, perform the EDID copy procedure described

in this manual prior to installation.

2. The diagram above shows a B132-004A-2 VGA + Audio Extender/Splitter Kit

installation. Installation will be the same for non-audio models, except that an

audio source and speakers will not be connected.

3. Test to make sure the entire installation works properly before pulling cables

through ceilings/walls.

4. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6

cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a

gauge (AWG) size higher than 24 AWG, will result in shorter extension distance.

All Tripp Lite N202-Series cables are made with 24 AWG solid-wire cabling.

Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid-wire

bulk cables. For optimal image quality between 500 and 1,000 ft., use Zero-

Skew cable, such as Tripp Lite P524-01K.

5. To achieve maximum resolution, it is recommended that you use Tripp Lite

P502-Series VGA video or P504-Series VGA video and audio cables with

RGB coax.

Source PC

B132-100A-WP-1B132-004A-2

B132-100A

14-11-071-9333F9.indd 17 11/20/2014 4:42:45 PM

Loading ...

Tripp Lite B132-100A VGA over Cat5/6 Extender, Box-Style Receiver for Video/Audio

Owner's Manual - Page 17