Loading ...
Loading ...
Loading ...
To attach the trimmer head E35B
Note: To increase the life of the cord it can be soaked
in water for a couple of days before it is assembled. This
will make the cord tougher.
1. Put the drive disc (B) on the output shaft.
2. Turn the output shaft to align one of the holes in the
drive disc with the related hole in the gear housing.
3. Put the locking pin (C) into the hole to lock the shaft.
4. Attach the trimmer head (H).
5. Install the nut (G).
H
B
C
G
6. Install the line chute and the trimmer head cover (F).
“Click”
F
To remove the trimmer head E35B
1. Put the locking pin in the hole to lock the shaft.
2. Press the snap-in clips on the trimmer head and
remove the trimmer head and trimmer line chute.
3. Remove the nut that holds the trimmer head and the
drive disc.
4. Remove the trimmer head.
Operation
Introduction
WARNING: Read and understand the
safety chapter before you use the product.
Husqvarna Fleet Services
™
Husqvarna Fleet Services
™
is a cloud solution that
gives the commercial fleet manager an overview of all
products. Husqvarna Fleet Services
™
can be added to
525iLXT. For more information about Husqvarna Fleet
Services
™
, refer to www.husqvarna.com.
Bluetooth
®
wireless technology
Products with built-in Bluetooth
®
wireless technology
can connect to mobile devices and enables additional
functions.
The symbol for
Bluetooth
®
wireless technology comes
on when your mobile device is connected to the product.
12 1937 - 006 - 30.06.2023
Loading ...
Loading ...
Loading ...